Installation guide

AT-GS950/8, AT-GS950/16, AT-GS950/24 and AT-GS950/48 Switches Installation Guide
23
Network Topologies
This section illustrates two network topologies: Gigabit Ethernet to the
desktop and Gigabit Ethernet backbone.
Gigabit Ethernet
to the Desktop
The topology shown in Figure 3 is commonly referred to as Gigabit
Ethernet to the desktop. This topology provides the best in performance
and reliability because each end node is connected directly to the AT-
GS950/16 Switch with a dedicated network link
.
Figure 3. Gigabit Ethernet to the Desktop Topology
Gigabit Ethernet
Backbone
In the topology illustrated in Figure 4, the AT-GS950/16 is connected to
other managed and unmanaged Ethernet switches to form a Gigabit
Ethernet backbone topology. The AT-GS950/16 Switch functions as the
focal point of the network by transferring Ethernet frames between the
switches. This topology reduces the amount of unnecessary traffic in each
workgroup, because the AT-GS950/16 Switch transfers frames only when
the source and destination end nodes are located on different switches.
This frees up bandwidth and improves network performance.
Legend
100 Mbps
1000 Mbps