Installation guide

AT-FS709FC Installation Guide
3
LEDs
Figure 2 illustrates the switch front panel LEDs. Table 2 lists and describes these LEDs.
Figure 2
A Close Up of the Front Panel LEDs
Table 2
LED Status
LEDs Color Description
LINK/ACTIVITY Green
On indicates a valid physical link on the port.
Blinking
indicates data is being transmitted.
Off
means no link.
100M Green
On
means the bandwidth is 100 Mbps.
Off
means the bandwidth is 10 Mbps.
(Off does not apply to Port 9.)
FDX (FULL-DUPLEX) Green
On
indicates full-duplex transmission mode.
Off
indicates half-duplex transmission mode.
(Off does not apply to Port 9.)
POWER Green
On
means there is power to the switch.
Off
means there is no power to the switch.
12345678
FDX
Link/Act
100M
Power
9