User`s guide

Running Diagnostics
88
Dumping the Software Configuration
Note
These feature is useful only to Allied Telesyn Customer Support to
diagnose a problem with your configuration. This command
‘dumps’ the configuration information on the screen.
To display the software configuration, perform the following procedure:
1. From the Main Menu, type 8 to select Diagnostics. The Diagnostics
Menu in Figure 30 on page 86 is displayed.
2. Type 3 to select Dump Configuration. A window similar to Figure 32
is displayed.
Figure 32 Dump Configuration Window
3. Press any key to return to the Diagnostics Menu.