Data Sheet

AT-FS201 and AT-FS202
Status Indicators
System LEDs
Power Indicates power is applied to the
converter
Per Fiber Port:
Link/Activity Indicates valid/invalid link
Indicated data is being received or
transmitted
Full-duplex/Collision Indicates operation at either full or
half-duplex
Indicates collision during transmission
on the port
Per Copper Port:
Link/Activity Indicates valid/invalid link
Indicates data is being received or
transmitted
Full-duplex/Collision Indicates operation at either full or
half-duplex
Indicates collision during transmission
on the port
Auto-negotiation Indicates port is set for auto-
negotiation
100M Indicates operation at either 10T or
100TX
Operational Characterisitcs
(Each port can be configured via the following switches)
Per Fiber Port:
Duplex Selects either full- or half-duplex
operation
Bytes Selects maximum packet size sent by
switch (1518 or 1522 bytes)
Per Copper Port:
Auto Selects auto-negotiation mode or
manual setting
Duplex Forces port to full or half-duplex
operation
(Auto setting = manual only)
Speed Forces port to 10 or 100Mbps
operation
(Auto setting = manual only)
Bytes Selects maximum packet size sent by
switch (1518 or 1522 b
ytes)
MAC Address Table 2k addresses
F
orwarding/F
iltering Rate
148,880pps for 100Mbps
14,880pps for 10Mbps
Latency 14.3µsec
(64 byte packet, 100Mbps full-duplex)
Operational Mode
MissingLink (ML)
Link Test
AT-FS232,AT-FS232/1 and AT-FS232/2
Status Indicators
System LEDs:
Power Indicates power is applied to the
converter
Mode status Indicates operating mode, MissingLink
TM
,
Smart MissingLink
TM
and Link Test
Per Fiber Port:
Link Indicates a valid receive link exists
Duplex Indicates full or half-duplex operation
Collision Indicates collision during packet
transmission on the port
Per Copper Port:
Link Indicates a valid receive link exists
Speed Indicates either 10 or 100Mbps operation
Auto Indicates port is set for auto-negotiation
FD/Collision Indicates collision during packet
transmission on the port
Indicates full or half-duplex operation
Operational Characteristics
(Each port can be configured via the following switches)
Per Fiber Por
t:
Duplex Selects either full or half-duplex
operation
Per Copper P
ort:
Auto Selects auto-negotiation mode or manual
setting
Duplex Forces port to full or half-duplex
operation
(Auto setting = manual only)
Speed Forces port to 10 or 100Mbps operation
(Auto setting = manual only)
MAC address table 2k addresses
F
orwarding/filtering rate
148,880pps for 100Mbps
14,880pps for 10Mbps
Latency
14.3
µ
sec
(64 byte packet,100Mbps full-duplex)
Operational Mode
MissingLink
TM
(ML)
Smart MissingLink
TM
(SML)
Link Test
Power Characteristics
Input voltage (auto-ranging)
External power supply 100-120V AC/60Hz,
220-240V AC/50Hz
Input supply voltage 12vDC +/- 5%
Max current .5
Power consumption 6W
Environmental Specifications
Operating Temp. 0°C to 40°C
Storage Temp. -20°C to 80°C
Relative humidity 5% to 95% non-condensing
Operating altitude 0 to 10,000 feet
Physical Characteristics
Dimensions 10.5cm x 9.5cm x 2.5cm
(4.12" x 3.75" x 1.0")
Weight 0.7lb
Electrical/Mechanical Approvals
EMC FCC Class A
Safety UL-Cul, CSA/CSA, NRTL, TUV,
CE compliant
FS200 Series | 2 Port Fast Ethernet Speed/Media Converting Switch
USA Headquar
ters
|
19800 Nor
th Creek Parkway | Suite 200 | Bothell | WA 98011 | USA | T: [phone] | F: [phone]
European Headquarters | Via Motta 24 | 6830 Chiasso | Switzerland | T: +41 91 69769.00 | F: +41 91 69769.11
Asia-Pacific Headquar
ters
|
11
T
ai Seng Link
|
Singa
pore | 534182 | T: [phone] | F: [phone]
www.alliedtelesis.com
©
2007
Allied
T
elesis Inc
. All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners. 617-00342-00 Rev H
Ordering Information
AT-FS201-xx
2 port Fast Ethernet switch,
10/100TX to 100FX (ST),
2km
AT-FS202-xx
2 port Fast Ethernet switch,
10/100TX to 100FX (SC)
AT-FS232/y-xx
2 port Fast Ethernet switch media converter
10/100TX to 100FX (SC)
Where y
= Multi-mode fiber 2km
= 1 single-mode fiber 15km
= 2 single-mode fiber 40km
Where xx = 10 AC Power supply, US power cord
= 20 AC Power supply, European power cord
= 30 AC Power supply, UK power cord
= 40
AC P
ower supply, Australian power cord
Associated Products
AT-MCR12 12 slot AC or DC powered chassis
AT-TRAY4 Mounting tray for up to four devices
AT-TRAY1 Mounting tray for one device
A
T
-WLMT
W
all-mount for one device