Installation guide

Rear Panel
4
Rear Panel
The rear panel has one power connector, which accepts 5V 2.5A power
input, and DIP switches for manual speed setting and eight RJ45 ports.
Figure 3
AT-FH803E Rear Panel
DIP Switches
Table 2 and Table 3 list the DIP switch settings for Port 8 and Port 7. To
manually set the DIP switches, for example to set Port 8 for 100 Mbps
(auto-negotiate OFF), push switch 1 to the
UP
position and Switch 2, to
the
DOWN
position.
Port 8 Port 7
Auto
100 M
10M
87654321
5V 2.5A
1234
Power Connector
Eight RJ45 Ports
DIP Switches for Port 7 and Port 8
Auto-negotiate Switch
100M Switch
10M Switch
Table 2
DIP Switch Settings for Port 8
Switch 1 Switch 2
Description
UP UP Auto-negotiate ON
UP DOWN 100 Mbps - Auto-negotiate OFF
DOWN UP 10 Mbps - Auto-negotiate OFF
Table 3
DIP Switch Settings for Port 7
Switch 3 Switch 4
Description
UP UP Auto-negotiate ON
UP DOWN 100 Mbps - Auto-negotiate OFF
DOWN UP 10 Mbps - Auto-negotiate OFF