Install guide

Removable Power Supply and Fan

Models Covered by this Guide

This document describes how to install the following models:

■ AT-PWR01 PSU (either AC or DC power supply unit)

■ AT-FAN01 (fan-only module)

■ AT-PWR02 PSU (AC power supply unit only)

Compatible Switches

For the AT-8900 and AT-9900 Series switches, you can install the following PSUs

and FOM:

■ AT-PWR0 1

■ AT-PWR0 2

■ AT-FAN 01

For the AT-9900s Series switch only, you can install the AT-PWR01 and

AT- FAN0 1 m od els.

Package Contents

Each switch is supplied with a single power supply unit (PSU), either AC or DC.

Depending on the model, the switch has either a fan-only module (FOM) or a

blanking panel.

■ The AT-8948, AT-9924T/4SP, and AT-9924Ts switches have a PSU and a

FOM installed.

■ The AT-9924T and AT-9924SP switches have a PSU and a blanking panel

installed.

The following items are included with each factory-installed PSU. Contact your

authorised distributor or reseller if any are damaged or missing.

■ one AC power cord (AC model)

■ one power cord retaining clip (AC model)

■ one warranty card