Instruction Manual

AT-ARW256E Quick Installation Guide
2.2.3 Installing the USB Device Driver - For Windows
®
2000
i Power on your computer to start Windows.
ii Place the Installation CD into your CD-ROM Drive.
iii At the following prompt, click Next
.
iv Select Search for a suitable driver for my device (recommended) option and click
Next.
v Click CD-ROM drives option and click Next.
vi At the next prompt, click Next to proceed installation with the indicated driver.
vii You may be prompted with Digital Signature Not Found dialog box during installation.
(This happens when Windows detects your driver as a new version).
Click Yes to proceed with the installation.
viii Click Finish when prompted. Upon completion, proceed to Chapter 3.
Page 14 of 32