Datasheet

USA Headquarters | 19800 North Creek Parkway | Suite 200 | Bothell | WA 98011 | USA | T: +1 800 424 4284 | F: +1 425 481 3895
European Headquarters | Via Motta 24 | 6830 Chiasso | Switzerland | T: +41 91 69769.00 | F: +41 91 69769.11
Asia-Pacific Headquarters | 11 Tai Seng Link | Singapore | 534182 | T: +65 6383 3832 | F: +65 6383 3830
www.alliedtelesis.com
© 2006 Allied Telesis Inc. All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners. 617-000032 Rev. F
AT-AR256E
| 4-Port ADSL Router
Up to 253 LAN Users Can Share
O
ne Line and One IP Address
The AT-AR256E supports up to 253 LAN-
attached users – easily enough for a small office,
while high speed ADSL services mean that they
c
an all share a single line and still have plenty of
performance. NAT allows 253 users to share
one public IP address for low-cost Internet
access.
Intelligent ADSL Rate Adaptation
The upstream and downstream data rates are
dynamically allocated by the AT-AR256E to
minimize noise and maximize service reliability.
For each session, the ADSL connection speed is
automatically reconfigured to achieve maximum
data throughput (within the limits imposed by
the service provider).
Flash Software Update
The AT-AR256E can be upgraded simply and
quickly by loading new firmware into flash
memory using the simple, browser-based
application. New enhancements can be loaded
into the unit in a matter of minutes.
Main Features
ADSL/ATM Support
ANSI T1.413-1998 Issue 2, ITU-T G.992.1 (G.dmt),
G.992.2 (G.lite), G.992.3 (G.dmt.bis), G.992.4 (G.lite.bis),
G.992.5 (ADSL2+), G.992.3/4 Annex L (RE-ADSL2),
G.992.5 Annex L (RE-ADSL2+) and G.992.5 Annex M
compliant
Rate Adaptive modem at 32Kbps steps
Dynamic Adaptive Equalisation to improve carrier’s
service area
Bridge T
ap Mitigation
ATM Layer with traffic shaping QoS (UBR, CBR, VBR-rt,
VBR-nr
t)
AAL ATM attributes – AAL5
Multiple PVC up to 8 (bridged)
Spectral compatibility with PO
TS
F5 OAM loopback/send and receive
Encapsulation Support
RFC 2684 Bridge and Routed LLC and VC Mux
RFC 2364 PPP
oA Client
RFC 2516 PPP
oE Client
RFC 2225/1577 Classical IP
T
ransparent Bridge
PAP/CHAP/MS-CHAP for Password Authentication
Network Support
Static IP, Dynamic RIP routing
IP/TCP/UDP/ICMP/ARP/RARP application
Network Address Translation (NAT)
Port mapping/forwarding
Easy setup of port forwarding rules for popular
games/applications
NAT Application Level Gateway for popular applications
DHCP server/relay/client
DNS relay agent
DMZ
IPSec and PPTP/L2TP VPN pass-through
PPP always on with configurable timeout
PPP Dial on Demand
Universal Plug and Play (UPnP)
Management Support
Web based HTTP management GUI
Web based firmware upgrade (local)
Soft Factory Reset Button via web GUI
T
elnet/CLI (Read Only)
Syslog
Firmware upgradeable for future feature enhancement
Security Support
NAT for basic firewall
Packet Filtering firewall
Stateful Packet Inspection
Protection against Denial of Ser
vice attacks
Password Authentication to modem
Hardware
Texas Instrument TNETD7300 Single Chip Network
Processor/AFE/Line Driver Chipset
Marvell 88E6060-RCJ 5+1 Port 10/100 MAC/PHY Switch
(Auto MDI/MDI-X)
2MB Flash ROM
8MB SDRAM
Dying Gasp
ITU K.21
Platform Support
OS independent for Ether
net
Power Requirements
Input Voltage: 9vDC +/- 10%
Input Current: 1.0A
Physical Specifications
LED Indicators
1 x Power
4
x Ethernet
1
x DSL
1 x Internet
External Connectors
1 x ADSL/2/2+ port (RJ-11)
1 x Reset button (restore to factory defaults)
4 x Ethernet 10/100 port (RJ-45; auto MDI/MDI-X)
1 x DC power jack (9V)
1 x Power on/off switch
Measurements
Dimension: 176.5(L) x 118.9(W) x 37.9(H) mm
Weight: Approx. 350g
Environmental Characteristics
Operating temperature: 0°C to 40°C
Non-operating temperature: -25°C to 70°C
Operating humidity: 30% to 80% Relative
Humidity (Non-Condensing)
Non-operating humidity: 30% to 95% Relative
Humidity (Non-Condensing)
Ordering Information
AT-AR256E-xx
ADSL Bridge/Router, Annex A
(4 x Ethernet 10/100 port)
AT-AR256E(B)-xx
ADSL Bridge/Router, Annex B
(4 x Ethernet 10/100 port)
Where xx = 10 for US power adaptor
30 for UK power adaptor
40 for
Australian po
w
er adaptor
50 for European power adaptor