Operation Manual

AT-AR256E v3 4 Ports ADSL2/2+ Router User Manual 35
Web Access Control
The Web Access Control page allows you to access the router via the web from a remote location like your
home or office.
Figure 26: Web Access Control
To configure Web Access:
1. Select Advanced menu.
2. Select Application > Web Access Control.
3. Select Enable.
4. Select the connection used in Choose a connection.
5. Configure the following fields:
 Remote Host IP
 Remote Netmask
 Redirect Port
6. Click Apply to temporarily activate the settings on the page. The WAN address is now added into the
IP Access List. This allows you to access your router remotely.
7. To make changes permanent, click Save Settings.