Datasheet

Flash Software Update
The AT-AR236E can be upgraded simply and
quickly by loading new firmware into flash
memory using the simple, browser-based
application. New enhancements can be loaded
into the unit in a matter of minutes.
Easy to Set Up
I
nstallation takes a matter of minutes using the
simple, browser-based configuration interface.
Standard cabling is used to connect to the
Ethernet LAN and ADSL. All cables, including
USB, are supplied with the product. All TCP/IP
Operating Systems are supported, including
Windows, Linux and Mac. An integral DHCP
server provides automatic IP address assignment
to all PCs on the LAN, while both static and
dynamic IP address assignment from the ISP are
supported. The AT-AR236E is ideal for ‘wires
only’, self-install services.
Main Features
ADSL/ATM Support
ANSI T1.413-1998 Issue 2, ITU-T G.992.1 (G.dmt),
G.992.2 (G.lite), G.992.3 (G.dmt.bis), G.992.4 (G.lite.bis),
G.992.5 (ADSL2+), G.992.3/4 Annex L (RE-ADSL2),
G.992.5 Annex L (RE-ADSL2+) and G.992.5 Annex M
compliant
Rate Adaptive modem at 32Kbps steps
Dynamic Adaptive Equalisation to improve carrier’s
service area
Bridge Tap Mitigation
ATM Layer with traffic shaping QoS
(UBR, CBR, VBR-rt, VBR-nrt)
AAL ATM attributes – AAL5
Multiple PVC up to 8 (bridged)
Spectral compatibility with POTS
F5 OAM loopback/send and receive
Encapsulation Support
RFC 2684 Bridge and Routed LLC and VC Mux
RFC 2364 PPPoA Client
RFC 2516 PPPoE Client
RFC 2225/1577 Classical IP
T
ransparent Bridge
PAP/CHAP/MS-CHAP for Password Authentication
Network Support
Static IP, Dynamic RIP routing
IP/TCP/UDP/ICMP/ARP/RARP application
Network Address Translation (NAT)
Port mapping/forwarding
Easy setup of port forwarding rules for popular
games/applications
NAT Application Level Gateway for popular applications
DHCP server/relay/client
DNS relay agent
DMZ
IPSec and PPTP/L2TP VPN pass-through
PPP always on with configurable timeout
PPP Dial on Demand
Universal Plug and Play (UPnP)
Management Support
Web based HTTP management GUI
Web based firmware upgrade (local)
Soft Factory Reset Button via web GUI
Diagnostic test (DSL, OAM, Network, Ping)
Telnet/CLI (Read Only)
Syslog
Firmware upgradeable for future feature enhancement
Security Support
NAT for basic firewall
Packet Filtering firewall
Stateful Packet Inspection
Protection against Denial of Service attacks
Password Authentication to modem
Hardware
Texas Instrument TNETD7300 Single Chip Network
Processor/AFE/Line Driver Chipset
2MB Flash ROM
8MB SDRAM
Dying Gasp
ITU K.21
Platform Support
OS independent for Ethernet
Windows 98SE/2000/Me/XP/2003 for USB
P
o
w
er Requir
ements
Input
Voltage: 9vDC +/- 10%
Input Current: 1.0A
Physical Specifications
LED Indicators
1 x PPP
1 x Power
1 x DSL
1 x Ethernet/Activity
1 x USB
External Connectors
1
x ADSL/2/2+ port (RJ-11)
1
x USB 1.1 port (Type B)
1 x Ethernet 10/100 port (RJ-45; auto MDI/MDI-X)
1 x Reset button (restore to factory defaults)
1 x DC power jack (9V)
Measurements
Dimension: 144(L) x 109(W) x 30(H) mm
Weight: Approx. 250g
Environmental Characteristics
Operating temperature: 0°C to 40°C
Non-operating temperature: -25°C to 70°C
Operating humidity: 30% to 80% Relative
Humidity (Non-Condensing)
Non-operating humidity: 30% to 95% Relative
Humidity (Non-Condensing)
USA Headquarters | 19800 North Creek Parkway | Suite 200 | Bothell | WA 98011 | USA | T: [phone] | F: [phone]
European Headquarters | Via Motta 24 | 6830 Chiasso | Switzerland | T: +41 91 69769.00 | F: +41 91 69769.11
Asia-Pacific Headquarters | 11 Tai Seng Link | Singapore | 534182 | T: [phone] | F: [phone]
www.alliedtelesis.com
© 2006 Allied Telesis Inc. All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners. 617-000031 Rev. K
AT-AR236E | ADSL Bridge/Router
Ordering Information
AT-AR236E-xx
ADSL Bridge/Router, Annex A
(1 Ethernet 10/100 port, 1 USB port)
AT-AR236E(B)-xx
ADSL Bridge/Router, Annex B
(1 Ether
net 10/100 por
t, 1 USB port)
Where xx = 10 for US power adaptor
30 for UK po
w
er adaptor
40 for Australian power adaptor
50 for European po
w
er adaptor