Installation guide

Chapter 6: Setting Advanced Properties
78
Speed and Duplex
Mode
The Speed & Duplex property sets
the connection speed and mode to
that of the network. Note that Full-
Duplex mode allows the adapter to
transmit and receive network data
simultaneously.
1. In Microsoft Windows, right-
click the Network Adapter in
Network Connections and click
Properties.
2. Click the Configure button and
then the Advanced tab.
3. Set the desired Speed &
Duplex value.
SRIOV Enables Single-Root I/O
Virtualization which allows virtual
machines to access the network
adapter directly rather than via the
Hypervisor.
1. In Microsoft Windows, right-
click the Network Adapter in
Network Connections and click
Properties.
2. Click the Configure button and
then the Advanced tab.
3. Set the desired SRIOV value.
Starting RSS CPU Specifies the first logical CPU
number that will be used for
scaling. This value is useful for
excluding CPU? that may already
dedicated to another application of
process. Values up to 63 may be
specified.
1. In Microsoft Windows, right-
click the Network Adapter in
Network Connections and click
Properties.
2. Click the Configure button and
then the Advanced tab.
3. Set the desired Starting RSS
CPU value.
TCP Connection
Offload (IPv4)
Not supported. 4. Not supported.
TCP Connection
Offload (IPv6)
Not supported. 5. Not supported.
Table 8. Advanced Features in Microsoft Windows
Feature Description Configuration Steps