Installation guide

Chapter 6: Setting Advanced Properties
68
Accessing the Advanced Tab
To modify the configuration properties of the Windows Operating systems,
you must access the Advanced Tab. Depending on your operating
system, there are several ways to do this. See the following procedures:
 “Selecting the Advanced Tab in Windows Server 2008 or Windows
Server 2008 R2” on page 68
 “Selecting the Advanced Tab in Windows Server 2012” on page 69
Selecting the
Advanced Tab in
Windows Server
2008 or Windows
Server 2008 R2
To select the Advanced Tab in the Windows Server 2008 or Windows
Server 2008 R2 Operating System, do the following:
1. Select the Start button. See Figure 17.
Figure 17. Windows Server 2008 and Windows Server 2008 R2 Search
Box
2. Enter the following command:
mmc devmgmt.msc