Installation guide

AT-ANC10S/2 and AT-ANC10S/4 Adapters Installation and User’s Guide
21
The following sections provide functional descriptions of the adapters:
 “AT-ANC10S/2 Adapter” on page 21
 “AT-ANC10S/4 Adapter” on page 22
AT-ANC10S/2
Adapter
The AT-ANC10S/4 adapter, shown in Figure 1, has two slots for SFP+
modules that operate at 10 Gbps in full duplex mode. You cannot change
the speed or duplex mode of the transceiver slots. The maximum
operating distance of an SFP+ slot will vary depending on the SFP+
transceiver and type of fiber optic cabling.
The adapter has an PCIe x8 motherboard bus connector.
Figure 1. AT-ANC10S/2 Adapter
AT-ANC10S/2 Adapter Physical Description
The faceplate on the AT-ANC10S/4 adapter, shown in Figure 2 on page
22, has two slots for SFP+ transceivers, and four LEDs.