Installation guide

AT-ANC10S/2 and AT-ANC10S/4 Adapters Installation and User’s Guide
107
Problem: A Generic Trunking (GEC/FEC) 802.3ad-Draft Static type of
team may lose some network connectivity if the driver to a team member is
disabled.
Solution: If a team member supports underlying management software
(ASF/IPMI/UMP) or Wake-On-LAN, the link may be maintained on the
switch for the adapter despite its driver being disabled. This may result in
the switch continuing to pass traffic to the attached port rather than route
the traffic to an active team member port. Disconnecting the disabled
adapter from the switch allows traffic to resume to the other active team
members.
Problem: Large Send Offload (LSO) and Checksum Offload are not
working on my team.
Solution: If one of the adapters on a team does not support LSO, LSO
does not function for the team. Remove the adapter that does not support
LSO from the team or replace it with one that does. This same solution
applies to Checksum Offload.
Problem: The advanced properties of a team do not change after
changing the advanced properties of an adapter that is a member of the
team.
Solution: If an adapter is included as a member of a team and you change
any advanced property, then you must rebuild the team to ensure that the
team's advanced properties are properly set.
Problem: Errors occur when an RSS-enabled adapter is included as a
member of a team on a Windows Server 2008, Windows Server 2008 R2,
or Windows Server 2012 system.
Solution: Disable RSS from all members of the team and rebuild the
team.