User manual

Troubleshooting
39
failure or a slot failure. You may need to reconfigure the
adapter card or the other device to avoid the conflict.
Only one device in the computer can use each I/O port and
interrupt vector. If two (or more) devices try to share resources,
one or all do not function properly. Table 8 lists common uses of
resources that can cause conflict.
To correct an I/O resource conflict
High voltages inside the computer present a safety
hazard. Be sure the power is OFF before removing
the cover.
Only remove the card at a static-free workstation,
with precautions to prevent damage to static-
sensitive components.
1. Remove the card from the computer according to the
manufacturer’s reference manual.
2. Move the card to another computer. See “Installing the card in
an ISA or EISA slot” on page 13.
3. Invoke CardAssistant (page 15) and run diagnostics again
(page 18).
4. If diagnostics passes, change the adapter card configuration
(page 14), and move the card back to the target computer.
Warning
!
C
au
tion
613-10434-00.bk Page 39 Monday, March 18, 1996 2:53 PM