User manual

Network Adapter Card Drivers
27
5. The batch file you use to get on the network must contain
these lines in the following order :
LSL
AT17ODI
IPXODI
NETX
login
6. Now reboot the computer to load the new configuration,
and look for the driver's log-on message.
Installation note: NDIS for TCP/IP
AT1700.DOS
is the AT-1700 adapter card driver based on the
Network Driver Interface Specification (NDIS) developed by
Microsoft and 3Com. It is used for Microsoft LAN Manager
applications, as well as implementations of Transmission Control
Protocol/Internet Protocol (TCP/IP) such as PC-NFS from Sun
Microsystems.
AT1700.COM
conforms to the Packet Driver specification
developed by FTP Software. It can be used for implementations
of TCP/IP such as PC/TCP, concurrent with other protocol
stacks.
Although the ATI drivers support multiple protocol
stacks, it is important to have only one stack of a
given type resident. For example, if you use the public
domain IP protocol driver
PROTMAN.SYS
, you should
not use another TCP/IP stack concurrently.
More information on installing the NDIS driver and the packet
driver in different environments is available in the readme file on
the CardAssistant diskette.
N
ot
e
613-10434-00.bk Page 27 Monday, March 18, 1996 2:53 PM