User manual

AT-1700

Working with CardAssistant menus

You can use either the keyboard or mouse to:

❑

Make menu selections

❑

Change parameter settings

❑

Save or cancel your configuration changes

CardAssistant’s main menu presents you with the choice of

configuring the card, running diagnostics or installing a driver.

Pop-up menus list the possible parameter settings, with the

current setting highlighted. The message window under the

menu lists available commands.

To change AT-1700 default settings

Make sure the configuration of the card is compatible with the

host before running diagnostics or attempting to load a driver. If

there are no other interface cards present in the host, the

likelihood of a conflict is slight. In this case, use the Auto

Configure option. If the computer has other peripheral cards

installed, you may need to change one or more I/O settings. To

help avoid conflicts, Table 8 on page 40 lists typical ways that

devices are configured.

TIP:

For future reference, use the Network Management Summary on

the back of your Quick Reference Guide to record the conﬁguration

settings that were changed.

1. Invoke CardAssistant if necessary. See “Invoking

CardAssistant” on page 15.

613-10434-00.bk Page 16 Monday, March 18, 1996 2:53 PM