System information

• The Port Speed and Mode parameter of the 1000Base-X port on the AT-A15
expansion module can only be set to '1Gbps full-duplex'. Attempting to set this to
any other value will result in the error message: "The error occurred with 'Set'
operation. Error: gen Error".
• The Port Speed and Mode parameter of the 100Base-FX port on the AT-A16, AT-
A17, and AT-A19 expansion modules can only be set to '100Mbps full-duplex'.
Attempting to set this to any other value will result in the error message: "The error
occurred with 'Set' operation. Error: gen Error".
AT-8324
AlliedView™-EMS 3.8 DEVICE MANAGEMENT GUIDE Page 71 of 330