System information

Note - The current firmware version does not allow Device Manager to support the RPS
and MASTER LEDs.
Note - When a port is configured to auto-negotiate, the current firmware version does not
always update its Port Duplex Status parameter with the correct negotiated mode. As a
result, the port's Duplex LED may show up as green when it should really be orange and
vice-versa.
Agent Menu
From the Agent menu, you can view and edit the system information for the device, or log
into the CLI using Telnet.
System Info
Displays basic system information, including system name, location, contact and
description.
Note - Attempting to enter more than 39 characters for the System Contact, System
Name, and System Location parameters will result in the error message: "The error
occurred with 'Set' operation. Error: gen Error".
Network Info
Displays network-related information such as the addresses of the default gateway
and the agents.
Manager Address Info
Displays the IP address of the management station.
Device Info
Displays general information about the switch.
Reset
Resets the switch.
Telnet
Starts a Telnet connection to the switch.
WEB Browser
Connects to the switch's HTTP server.
AlliedView™-EMS 3.8 DEVICE MANAGEMENT GUIDE Page 67 of 330