System information

Default VPT to Queue
Displays information about the VLAN tag priority.
Default DSCP to Queue
Displays information about the setting of default dscp to queue map.
Queue Profiles
Displays information about the queue management profiles.
Note - The current firmware version does not allow the Queue Value parameters to
be configured.
Port Trunking
Basic Info
Displays basic information about port trunking.
Note - The current firmware version does not allow any of the parameters under
this table to be configured.
Balancing Criteria
Displays information about Aggregate Index.
Note - The current firmware version does not allow the Balance Layer, Used
Addresses and Broadcast Type parameters to be configured.
Aggregator Info
Displays information about every Aggregator that is associated with this system.
Note - Valid MIB Set values for the Actor Administrative Key parameter are in the
range [1 - 65535] inclusive. Attempting to set this parameter to a value outside of
the valid range will result in the error message: “The error occurred with ‘Set’
operation. Error: bad value.”
Aggregator Port List
Displays Link Aggregation Control information for every Aggregation Port
associated with this device.
Aggregation Port Info
Displays a list of Link Aggregation Control configuration parameters for each
Aggregation Port on this device.
Note - The current firmware version returns a 'noSuchName' value for the Port
Number parameter.
Note - Device Manager does not handle 8-bit string parameters correctly. As a result,
the Actor Administrative Status and Partner Administrative Status parameters will
display unrecognizable values and will not be configurable. The Actor Operational
AlliedView™-EMS 3.8 DEVICE MANAGEMENT GUIDE Page 47 of 330