System information

Tail Drop/WRED
Displays information about the Tail Drop or WRED parameters and the EF of WRR
parameters.
Note - The current firmware version does not allow the Row Status parameter to be
configured.
DSCP Mutation
Displays information about the new DSCP for the packet.
DSCP Remark
Displays information about the DSCP remark packet.
Note - The current firmware version does not allow the New DSCP parameter to
be configured.
QoS to Queue
Displays information about the queue ID.
Note - Valid MIB Set values for the Queue ID parameter are in the range [1-4]
inclusive. Attempting to set this parameter to a value outside of the valid range will
result in the error message: "The error occurred with 'Set' operation. Error: bad
value."
DSCP to Queue
Displays information about the queue number.
Note - Valid MIB Set values for the Queue ID parameter are in the range [1-4]
inclusive. Attempting to set this parameter to a value outside of the range valid
range will result in the error message: "The error occurred with 'Set' operation.
Error: bad value."
UDP Port to DSCP
Displays information about the EF management for the system.
Note - Valid MIB Set values for the Priority parameter are in the range [1-4] inclusive.
Attempting to set this parameter to a value outside of the range valid range will
result in the error message: "The error occurred with 'Set' operation. Error: bad
value."
DSCP to DP
Displays information about the DSCP to DP table.
Note - Valid MIB Set values for the DP parameter are '0' and '2'. Attempting to set
this parameter to any other value will result in the error message: "The error
occurred with 'Set' operation. Error: bad value."
AlliedView™-EMS 3.8 DEVICE MANAGEMENT GUIDE Page 46 of 330