System information

Note - The current firmware version does not allow Device Manager to display
Utilization information.
Interface Info
Standard
Displays port statistics such as the number of frames received and transmitted on
the port, bytes received and transmitted on the port, and port status.
Note - The current firmware version does not allow the Promiscuous Mode
parameter to be configured.
Note - The current firmware version returns a "noSuchName" value for the
following parameters:
o Received Error Packets
o Transmitted Error Packets
o Transmitted Buffer Length
o Received Bytes (HC)
o Received Unicast Packets (HC)
o Received Multicast Packets (HC)
o Received Broadcast Packets (HC)
o Transmitted Bytes (HC)
o Transmitted Unicast Packets (HC)
o Transmitted Multicast Packets (HC)
o Transmitted Broadcast Packets (HC)
Additional Info
Displays additional information about the port's interface info.
Error Statistics
Standard
Displays error statistics for the port.
Note - The Ethernet Chip Set parameter is not applicable to the AT-8000S series
and should be ignored.
Note - The current firmware version returns a "noSuchName" value for the
following parameters:
o Alignment Error Frames
o Multi Collision Frames
o SQE Test Errors
o Deferred Transmissions
o Excessive Collisions
o Internal MAC Transmit Errors
o Carrier Sense Errors
o Symbol Errors
Additional Info
Displays information about a table containing 64-bit versions of error counters.
AlliedView™-EMS 3.8 DEVICE MANAGEMENT GUIDE Page 43 of 330