System information

Port Menu
From the Port menu, you can view MIB information about the ethernet and voice ports.
Interface Info
Ethernet
Displays information for each ethernet port.
Note - The current firmware version returns 'not available' for the following
parameters:
o Port Link State
o Port Type
o Port Speed
o Port Duplex Mode
o Port Autonegotiation State
Voice
Displays information for each voice port. Information displayed will vary depending
on the protocol used : H.323, Media Gateway Control (MGCP), or Session Initiation
(SIP).
Note - H.323 : The Port Capability parameter does not display all capabilities used
during call setup.
Note - MGCP : The current firmware version returns 'deleted' for the Port State
parameter even if an MGCP port has already been created.
Note - MGCP : The current firmware version returns 'data -> <MIB variable name>'
instead of actual values for the following parameters:
o Port Operational State
o Port Type
o Port Profile
o Port Domain
o Port End Point Identifier
o Port Package
o Port Call Agent
o Port Notified Entity
o Port Digit Map
o Port Network Loss Rate
Note - MGCP : The current firmware version returns '0' instead of actual values for
the following parameters:
o Port Suspicion Threshold
o Port Disconnection Threshold
o Port Initial Retransmission Delay
o Port Maximum Retransmission Delay
o Port History Time
o Port Maximum Propagation Delay
AlliedView™-EMS 3.8 DEVICE MANAGEMENT GUIDE Page 290 of 330