System information

AT-PB300 Series Media Converter Modules
PB301
LED State Description
DUP Green
Gray
The media converter is operating in full-duplex mode.
The media converter is operating in half-duplex mode.
ML Green The Missing Link feature is enabled.
Note - Port A is displayed as an SC connector instead of a VF-45 connector.
Note - The Port A Mode parameter for this module has a fixed value of 'full' and cannot be
modified.
Note - The current firmware version does not allow the Port B Mode parameter to be set
to 'full' from the default value of 'half'. Likewise, it cannot be set to 'half' if it was set to 'full'
using the Omega interface.
Note - Expect the DUP LED to be green when it should be orange and vice-versa when the
Port B Mode parameter is set to 'auto'. This is because the current firmware version is
unable to provide information on the negotiated mode for Port B.
AlliedView™-EMS 3.8 DEVICE MANAGEMENT GUIDE Page 286 of 330