System information

System Config
Displays the device's systems variables.
Diagnostics
Displays the device's software version, fan speed and fan temperature.
Reset
Resets the device.
Telnet
Starts a Telnet connection to the chassis.
Status Menu
From the Status Menu, you can view information about AT-CV5000 Modules installed on
the chassis.
Module Info
Displays the basic module configuration information of the device. Options to view
all/per module information are displayed.
Note - The Module Name parameter accepts inputs from 1 to 39 characters only
and cannot be set to NULL.
Note - The Module Serial Number parameter is not applicable to modules 19 to 22
and should be ignored.
Note - Setting the Module Reset parameter of media converter line cards to 'yes' will
not reset the line cards.
Note - The Module Reset parameter always displays the value '???(0)'.
Note - The Module Operation Mode parameter of control processor modules
always displays '???(0)'.
Port Info
Displays the port cofigurable parameters. Options to view all/per module
information are displayed.
Note - Configuring the Port Ingress Rate Limit parameter actually configures the Port
Egress Rate Limit parameter. Configuring the Port Egress Rate Limit parameter
actually configures the Port Ingress Rate Limit parameter.
AlliedView™-EMS 3.8 DEVICE MANAGEMENT GUIDE Page 254 of 330