System information

Device Manager LEDs for AT-CV5000 Chassis
LED State Description
PWR1 Green
Gray
Power supply 1 is installed and power is on.
Power supply 1 is not installed or it is installed but not powered
on.
PWR2 Green
Gray
Power supply 2 is installed and power is on.
Power supply 2 is not installed or it is installed but not powered
on.
FAN1 Green
Gray
FAN 1 is installed and power is on.
FAN 1 is not installed or it is installed but not powered on.
FAN2 Green
Gray
FAN 2 is installed and power is on.
FAN 2 is not installed or it is installed but not powered on.
Note - If there is more than 1 control processor module installed on the AT-CV5000
chassis, activating the Reset function through the Reset button on any of the AT-CV5M01
images or through the Reset option in the Agent menu will cause the AT-CV5000 to restart
endlessly. As a result, Device Manager will lose connection to the AT-CV5000. To re-
establish connection, manually restart the AT-CV5000.
Note - Please refer to AT-CV5000 Modules for the operations and behavior of the modules
installed on the chassis.
Agent Menu
From the Agent Menu, you can view and edit the system information for the chassis, or log
into the CLI using Telnet.
System Info
Displays basic system information, including system name, location, contact and
description.
Note - The System Contact, System Name and System Location parameters accept
inputs of up to 38 characters only. Input values that exceed this limit will
automatically be truncated.
Network Info
Displays network-related information such as the addresses of the default gateway
and the TRAP Destination.
AlliedView™-EMS 3.8 DEVICE MANAGEMENT GUIDE Page 253 of 330