System information

AlliedView™-EMS 3.8 DEVICE MANAGEMENT GUIDE Page 244 of 330
Device Manager LEDs for AT-9924 Family
LED State Description
- a PSU is installed but has a power supply or fan fault, or its
temperature has exceeded its recommended threshold, or
- an FOM is installed and a fan has failed.
Note - No FOM is OK for AT-9924T and AT-9924SP.
DUPLEX Green
Orange
Gray
The port is operating at full duplex.
The port is operating at half duplex.
The port has no link.
Agent Menu
From the Agent menu, you can view and edit the system information for the switch, or log
into the CLI using Telnet.
System Info
Displays basic system information, including system name, location, contact and
description.
Firmware Info
Displays a list of software releases installed on the switch.
Power Supply Info
Displays information about the power supply.
File List
Displays a list of the files in the switch's file system.
Config File Name
Displays the file name of the start-up configuration file.
Chassis Temperature and Fan Info
Displays the actual temperature of the switch, the temperature status, and the fan
status.
Reset
Reset Cold resets the hardware and executes the default configuration file. Reset
Warm performs a warm start of the software modules and executes the default
configuration file.