System information

Note - If the MD5 Key parameter is set to a new value whose length is shorter than
the length of the previously active MD5 Key, an extra character, as well as the
remaining characters of the previous key, is appended to the new value.
Bridge Menu
From the Bridge menu, you can view and edit bridge information such as the forwarding
database, discard/aging time information, spanning tree status and 802.1p.
Forwarding Database
Displays the Forwarding Database table.
Discard/Aging Time Info
Displays information about the number of address entries that were learned but
discarded because either there was a lack of memory or the entry's aging timer
expired.
Spanning Tree Info
STP Global Settings
Displays spanning tree parameters such as status and version.
MSTP Instance Info
Displays information about the Multiple Spanning Tree Protocol instance.
Note - The current firmware version does not allow the following parameters to be
configured:
o VLAN Range List 1 - 64
o VLAN Range List 65 - 128
o VLAN Range List 129 - 192
o VLAN Range List 193 - 256
o VLAN Range List 257 - 320
o VLAN Range List 321 - 384
o VLAN Range List 385 - 448
o VLAN Range List 449 - 512
o Row Status
Statistics
Displays statistics about frames received/transmitted on the switch port.
High Capacity Ports
Displays statistics about frames received/transmitted on high capacity ports.
Note - The current firmware version returns 'noSuchName' for the Received
Frames, Transmitted Frames and Discarded Frames parameters.
AlliedView™-EMS 3.8 DEVICE MANAGEMENT GUIDE Page 224 of 330