System information

AT-8948i (AT-x900-48FE)
Device Manager LEDs for AT-8948 and AT-8948i (AT-x900-48FE)
LED State Description
PWR 1 and
PWR 2
Green
Gray
Red
There is a power supply unit (PSU) in the PSU bay, and it is
supplying power to the switch.
There is a functioning Fan Only Module (FOM) in the PSU bay.
Either:
- there is no PSU or FOM in the PSU bay, or
- a PSU is installed but has a power supply or fan fault or its
temperature has exceeded its recommended threshhold (75
degrees C), or
- an FOM is installed and a fan has failed.
DUPLEX Green
Orange
Gray
The port is operating at full duplex.
The port is operating at half duplex.
There is no link over the port.
AlliedView™-EMS 3.8 DEVICE MANAGEMENT GUIDE Page 187 of 330