Specifications

Hardware Reference 35
Software Release 3.0.2
C613-03092-00 REV C
following figure is an example of output from the show system command for
the AT-9924T/4SP switch.
The first section of the output shows information about boards installed in the
switch. There are details about the switch base card, the accelerator card if
installed, and the type of power supply unit or fan-only module. Both the part
names and serial numbers of the base card and accelerator card are displayed.
Record the details of the base card and the network processor accelerator card
for later reference. If you have questions or problems with the network
processor accelerator card at any time, contact your authorised distributor or
reseller and supply the serial numbers for them.
Switch System Status Time 14:50:14 Date 11-Nov-2004
Board ID Bay Board Name Host Id Rev Serial number
------------------------------------------------------------
Base 220 AT-9924T/4SP 0 M1-0 61556164
Accel 210 AT-ACC01 0 M1-1 61493315
PSU 214 1 AT-FAN01 0 M2-1 61106469
PSU 212 2 AT-PWR01-AC 0 M2-1 60703190
------------------------------------------------------------
Memory - DRAM :524288 kB FLASH 16384 kB
------------------------------------------------------------
SysDescription
Allied Telesyn AT-9924T/4SP version 2.6.6-00 11-Nov-2004
SysContact
SysLocation
SysName
SysDistName
SysUpTime
620 ( 00:00:06 )
Boot Image : 99b104.fbr size 1026588 11-Nov-2004
Software Version: 2.6.6-00 11-Nov-2004
Release Version : 2.6.6-00 11-Nov-2004
Patch Installed : NONE
Territory : usa
Help File : 89-272a.hlp
PSU1: (FAN) Fan: Normal
PSU2: (AC) Fan: Normal Temp: Normal Power: Normal
Current temperature : Normal
FAN
-----------------
Main fans Normal
Accelerator fan 1 Normal
Accelerator fan 2 Normal
-----------------
Configuration
Boot configuration file: flash:boot.cfg (exists)
Current configuration: flash:boot.cfg
Security Mode : Disabled
Warning (2048284): No patches found.