Specifications

22 AT-8900, AT-9900, AT-9900s Series Switches
Software Release 3.0.2
C613-03092-00 REV C
Bootloader
messages
The following table explains messages that bootloader software displays at
initial startup for the AT-9900s switch.
Message Description
Bootloader <version>, built
<date>
Banner that identifies the bootloader software.
Initial RAM test...passed
or
Initial RAM test...failed
Whether initial RAM tests are successful. If tests detect a
problem with DRAM, the switch cannot be used. Contact
your authorised distributor or reseller.
Available RAM...512 MB The switch is using the amount of memory indicated.
Relocating the bootloader
to execute from
RAM...done
or
Relocating the bootloader
to execute from
RAM...failed
Whether bootloader software is successfully running from
RAM instead of flash memory. If not successful, the system
pauses indefinitely; contact your authorised distributor or
reseller.
Boot fallback software (Y) ? Prompt that lets you override the standard startup sequence,
typically when troubleshooting.
If you press Y, the switch boots from fallback software, and a
confirmation message is displayed. For more information, see
fallback output.
Initialising file system
access...done
or
Initialising file system
access...failed
Whether bootloader software has initialised access to the file
system.
Failure means a problem with the file system or memory
device. The switch reformats memory and processing
continues but data will be lost. Contact your authorised
distributor or reseller.
Booting install-type
filename.pkg.
Name of the software package to be installed: preferred
base package, temporary base package, or fallback. For
information about types of install, see “Install Process” in
the Managing Configuration Files and Software Versions
chapter in the Software Reference.
Installing system.img
<bytes>...done
or
Installing system.img
<bytes>...failed
Whether the system software image of the given size is
successfully installed in RAM and able to execute.This image
is extracted from the installed package.
If this fails when booting from a base package, the switch
goes to the fallback software.
If this file cannot be extracted from the fallback package,
there may be a problem with fallback; contact your
authorised distributor or reseller.
Initiating system
software...done
or
Initiating system
software...failed
Whether bootloader software has initiated execution of
product software or fallback software, whichever the user
selected, and is shifting control to it. If not successful, the
system pauses indefinitely; contact your authorised
distributor or reseller.
Bootloader Error Messages