Specifications

Hardware Reference 9
Software Release 3.0.2
C613-03092-00 REV C
AT-9900s Series Switch
The AT-9900s Series switch is a gigabit link aggregation switch that operates
with other switches that have 10Mb/100Mb/1Gb/10Gb Ethernet ports. This
switch can act as a gigabit server backbone or pass aggregated traffic over its
gigabit ports. The switch can also aggregate gigabit desktop user connections
and pass traffic to other 10 Gigabit Ethernet equipment.
Environmental
conditions
Operating temperature range: 0º C to 40º C (32ºF to 10F)
Storage temperature range: -25ºC to 70º C (-13ºF to 158ºF)
Relative humidity range for operation: 5% to 80% non-condensing
Relative humidity range for storage: 5% to 95% non-condensing
Operational altitude: 3,050 metres maximum (10,000 feet)
Regulatory
standards
EMC: EN55022 class A, FCC class A, and VCCI class A.
EN61000-3 levels 2 (Harmonics), and 3 (Flicker)—AC models only
Immunity: EN55024
Safety: UL60950-1, CAN/CSA-C22.2 NO. 60950-1-03, EN60950-1,
AS/NZS60950, and EN60825-1
Certification: UL, cUL, and TUV
Switching core Application-Specific Integrated Circuit (ASIC) switch chip
High performance IPv4 switching
128MByte packet buffer memory
Processing core 667MHz RISC Processor
32MBytes of non-expandable fixed flash
512MBytes Double Data Rate (DDR) Synchronous DRAM, expandable to
1gigabyte
512kBytes of NVSRAM
AT-9924Ts model The unmatched flexibility of the AT-9924Ts switch tailors solutions to a wide
range of networking needs. It is currently the sole model in the AT-9900s Series.
Key features are:
Autonegotiating, multi-layer gigabit switch
24 10/100/1000BASE-TX ports (RJ-45 connectors)
Out-of-band 10/100/1000BASE-T Ethernet management port
Two high-speed 20Gbps bays to support combinations of expansion
modules
Supports dual, hot-swappable, load sharing PSUs (AT-PWR01)—a second
PSU is optional
Optional 10GbE expansion module
Optional 12-port SFP expansion module
Optional 12-port RJ-45 expansion module
AT-9924Ts front panel