- Allied Telesis, Inc Switches Datasheet

Features in 276-01 32
Version 276-03
C613-10474-00 REV B
CR00011243
ISAKMP 2 Previously, if an IPsec/ISAKMP tunnel was under heavy load, an ISAKMP peer may
have retransmitted messages. When the last message in an ISAKMP exchange
was retransmitted, the remote peer did not expect to receive the second message
after the exchange had finished and caused the router or switch to reboot.
This issue has been resolved.
YY
YYY-----
CR00011269
SSL 2 When the SSL server had multiple concurrent users, some SSL sessions failed to
establish, because the SSL handshakes failed.
This issue has been resolved.
YY
YYYYYYYY
CR00011300
User 2 Previously, if the router or switch was acting as an 802.1x authenticator, and it
received an illegal RADIUS packet (an Access-Reject packet with an EAP code of
“successful”), the router or switch would reboot.
This issue has been resolved. The switch now rejects such authentication
requests.
YY
YYYYYYYY
CR00011324
SSL 2 A reboot could occur when the SSLv2 client received a hello message that had an
incorrect challenge length.
This issue has been resolved, so that the SSL server’s resistance to denial of service
attacks has been improved.
YY
YYYYYYYY
CR00011328
PIM 2 When the switch was using PIM to route multicast traffic, it sometimes rebooted
if the command show switch table=nh was entered.
This issue has been resolved.
--
-----YY-
CR00011337
Environment
Monitoring
2 The switch did not record the system temperature, and therefore output of the
command show system displayed the temperature as 0°C.
This issue has been resolved.
--
-------Y
CR00011345
MIB 2 The ATR enterprise MIB includes objects for managing ping operations. These
objects within the MIB are now fully supported.
Minor modifications have also been made to the MIB. Download the latest
atrrouter.mib file from ftp.alliedtelesyn.co.nz/pub/ar-mib/atrouter.zip.
YY
YYYYYYYY
CR Module Level Description
AR400 AR7x5 AR750S Rapier i AT-8800 AT-8600 AT-8700XL AT-8948 AT-9900 AT-9800