Specifications

Hardware Reference 37
C613-03043-00 REV B
Figure 19: Example output from the SHOW SYSTEM command for an AT-9800 Series switch, showing DRAM.
Diagnostics
The switch software includes a set of diagnostic programs. These programs
perform basic level checks of all system components. They do not run in
conjunction with the normal operating code, and require that the system be
totally dedicated to their use. A detailed knowledge of the way the switch
hardware functions is necessary if diagnostics are to be used effectively.
The switch will not perform switching operations if diagnostics are running.
This section is not intended as a guide to the diagnostics software. Diagnostics
are designed to be run by service personnel only. For more information, contact
your Authorised Allied Telesyn distributor or reseller.
Switch System Status Time 11:25:50 Date 28-Mar-2002.
Board ID Bay Board Name Rev Serial number
--------------------------------------------------------------------------------
Base 156 AT-9816GF M1-1 46709354
--------------------------------------------------------------------------------
Memory - DRAM : 65536 kB FLASH : 15360 kB
--------------------------------------------------------------------------------
SysDescription
Allied Telesyn AT-9816GF version 2.4.0-00 22-Aug-2001
SysContact
SysLocation
SysName
SysDistName
SysUpTime
3382 ( 00:00:33 )
Software Version: 2.4.0-00 22-Aug-2001
Release Version : 2.4.0-00 22-Aug-2001
Release built : Mar 28 2002 at 00:20:31
Patch Installed : NONE
Territory : usa
Help File : help.hlp
Main PSU : On Main Fan : On
RPS Monitor : Off
Current Temperature : 29 Celsius
Configuration
Boot configuration file: Lucy.cfg (exists)
Current configuration: snoopy.cfg
Security Mode : Disabled
Warning (2048283): No patches found.