Specifications

Hardware Reference 33
C613-03043-00 REV B
Use the SHOW SWITCH command again, and if the display is still not correct,
contact your authorised Allied Telesyn distributor or reseller.
Figure 16: Example output from the SHOW SWITCH command for a 9800 Series switch with upgraded CAM.
If any CAM test fails, check that the CAM is correctly installed in its slot and repeat the
tests. Contact your authorised Allied Telesyn distributor or reseller if the CAM does not
operate correctly.
Figure 15: Example output from the SHOW SWITCH command for a 9800 Series switch with standard CAM (no
external CAM).
Switch Configuration
---------------------------------------------------------------------------
CAM size ( entries ) ....... 40960
Switch Address ............. 00-00-cd-05-01-0f
Learning ................... ON
Ageing Timer ............... ON
Number of Fixed Ports ...... 16
Number of Uplink Ports ..... 0
Mirroring .................. DISABLED
Mirror port ................ None
Ports mirroring on Rx ...... None
Ports mirroring on Tx ...... None
Ports mirroring on Both .... None
Number of WAN Interfaces ... 0
Name of Interface(s) ....... -
Ageingtime ................. 300
VLAN classification ........ To be defined
UpTime ..................... 00:00:03
Hashingfiled ............... L2 L3 L4
---------------------------------------------------------------------------
Switch Configuration
---------------------------------------------------------------------------
CAM size ( entries ) ....... 204800
Switch Address ............. 00-00-cd-05-01-0f
Learning ................... ON
Ageing Timer ............... ON
Number of Fixed Ports ...... 16
Number of Uplink Ports ..... 0
Mirroring .................. DISABLED
Mirror port ................ None
Ports mirroring on Rx ...... None
Ports mirroring on Tx ...... None
Ports mirroring on Both .... None
Number of WAN Interfaces ... 0
Name of Interface(s) ....... -
Ageingtime ................. 300
VLAN classification ........ To be defined
UpTime ..................... 00:01:21
Hashingfiled ............... L2 L3 L4
---------------------------------------------------------------------------