Specifications

38 AT-9800 Series Switch
C613-03059-00 REV F
Warning Performing a full flash test or erasing flash will delete all
configuration and release files. Make sure you know how to reload these files
before erasing flash or performing a flash test.
To run a diagnostic program, enter the corresponding letter or number (or key).
There are several sub-menus to cover all the available options. Control keys for
diagnostic operations are shown in the following table.
A reasonable understanding of the system’s structure is needed to operate
diagnostics and interpret the results.
To restore the switch to normal operation, use a pen or pencil to operate the
recessed RESET button on the front panel, or press “0” (zero) to restart.
For More Information
Documentation Set The Documentation and Tools CD-ROM bundled with each switch contains the
complete document set for AT-9800 Series switches and their expansion
options, as well as tools for switch management. The CD-ROM includes:
■ The AT-9800 Series Statutory and Safety Information booklet, which includes
important safety information and statutory declarations for AT-9800 Series
switches.
■ The AT-RPS9000 Statutory and Safety Information booklet, which includes
important safety information and statutory declarations for the
AT-RPS9000 chassis and AT-PWR9000 power unit.
■ The AT-9800 Series Switch Quick Install Guide, which outlines the procedure
for installing AT-9800 Series switchs.
■ The AT-RPS9000 & AT-PWR9000 Quick Install Guide, which outlines the
procedure for installing AT-RPS9000 chassis and AT-PWR9000 power
units.
■ The AT-9800 Series Switch AlliedWare™ Operating System Software Reference,
which provides detailed information on configuring the switch and its
software.
■ The CAM Quick Install Guide, which outlines the procedure for installing
Content Addressable Memory.
■ AT-TFTP Server for Windows, for downloading software releases.
■ Adobe Acrobat Reader, for viewing online documentation.
You can also download these documents and updates from
www.alliedtelesis.com/support/software.
Key Function
Q Quits test that are running tests and displays the banner page.
S Prints a summary of test results so far.