Install guide

10 AT-9800 Series
C613-04038-01 REV F
9. At the login prompt, enter the user name and password
The default username is manager:
User Name: manager
Password: friend
The System Status page is displayed. Select options from the sidebar menu
to configure and manage the switch.
For context-sensitive online help, click on the Help button at the top of the
sidebar menu or on any pop-up page.
System LEDs
The AT-9800 Series Hardware Reference has further troubleshooting information,
including information on Switch Port LEDs.
Table 2: System LEDs for AT-9800 Series switches.
LED State Function
PWR
(Power)
Green The switch is receiving power
Fault Red The switch or management software is malfunctioning
1 Flash A switch fan has failed or is operating below the
recommended speed
2 Flashes If RPS monitoring is enabled, an RPS fan has failed or is
operating below the recommended speed
3 Flashes If an RPS is connected, the switch’s PSU (Power Supply
Unit) has failed
4 Flashes If RPS monitoring is enabled, the RPS PSU has failed
5 Flashes If RPS monitoring is enabled, an RPS is not connected or
is not operational
6 Flashes The switch’s temperature has exceeded the
recommended threshold
RPS (Redundant
Power Supply)
Green An RPS is connected to the switch and is receiving
power
CompactFlash
Activity
(Rear panel)
Green The compact flash memory is active. Do not eject the
flash memory module