AT-9800 Series Switch Quick Install Guide AT-9812T AT-9812TF AT-9816GB AT-9816GF
AT-9800 Series Quick Install Guide Document Number C613-04038-01 REV F. Copyright © 2005 Allied Telesyn International, Corp. 19800 North Creek Parkway, Suite 200, Bothell, WA 98011, USA. All rights reserved. No part of this publication may be reproduced without prior written permission from Allied Telesyn. Allied Telesyn International, Corp. reserves the right to make changes in specifications and other information contained in this document without prior written notice.
Quick Install Guide 3 Documentation Roadmap AT-9800 Series CAM AT-9800 Series Safety and Statutory Information Booklet CAM Quick Install guide AT-RPS9000 Safety and Statutory Information Booklet AT-9800 Series Quick Install Guide General Customer Support AT-RPS9000 Quick Install Guide Visit www.alliedtelesyn.co.nz for the latest documentation, FAQs, and support information.
AT-9800 Series Selecting a Site The switch can be installed in a standard 19-inch rack or on a level surface such as a desktop or bench. When installing the switch, choose a site that: ■ Allows adequate airflow around the switch and its vents ■ Is free of dust and moisture ■ Will maintain an ambient temperature range of 0 - 40º C (32 - 104º F) and a humidity range of 5 - 95% non-condensing. ■ Has a reliable and earthed (grounded) power supply circuit, preferably dedicated and filtered.
Quick Install Guide 5 5. Install CAM (Optional) If you purchased a Content Addressable Memory (CAM) module, install it now by following the instructions in the CAM Quick Install Guide. The CAM Quick Install Guide can be found on the AT-9800 Series Documentation and Tools CD-ROM, or can be downloaded from www.alliedtelesyn.co.nz/support/at9800/. 6. Place the switch in its operating location If installing the switch in a rack: 7.
AT-9800 Series 8. Apply DC power to the switch (for DC models) Read the Safety and Statutory Information booklet before connecting a DC power supply. A copy of this booklet is included with each switch. It is also included on the Documentation and Tools CD-ROM, or can be downloaded from www.alliedtelesyn.co.nz/support/at9800/. Only trained and qualified personnel should connect a DC power supply. Due to exposed terminals, DC powered switches should only be installed in Restricted Access Areas.
Quick Install Guide 7 10. Connect the Redundant Power Supply (Optional) AC models of AT-9800 Series switches have a Redundant Power Supply (RPS) connector on their rear panel. AT-9812TF and AT-9816GF AC models can be used with AT-RPS8000 RPS systems, while AT-9812T and AT-9816GB AC models can be used with AT-RPS9000 systems. RPS systems can be purchased separately, contact your authorised Allied Telesyn distributor or reseller for more information. 11.
AT-9800 Series 12. Connect the data cables Make sure each cable connection is secure. The switch will now perform basic Layer 2 switching functions. Configuring the Switch Some configuration is necessary if you wish to enable the switch’s advanced switching capabilities. The switch can be configured via the Command Line Interface (CLI) or Graphical User Interface (GUI). Using the CLI to configure a switch 1.
Quick Install Guide 9 Use the following command to change the account password: set password To display a list of help topics, enter: help To display help on a specific topic, enter: help topic Alternatively, type a question mark (?) at the end of a partially completed command to see a list of valid options. See the AT-9800 Series Software Reference for more information on configuring the switch.
AT-9800 Series 9. At the login prompt, enter the user name and password The default username is manager: User Name: manager Password: friend The System Status page is displayed. Select options from the sidebar menu to configure and manage the switch. For context-sensitive online help, click on the Help button at the top of the sidebar menu or on any pop-up page. System LEDs Table 2: System LEDs for AT-9800 Series switches.
Quick Install Guide 11 Documentation and Tools CD-ROM The Documentation and Tools CD-ROM bundled with each switch contains the complete Documentation Set for AT-9800 Series switches and their expansion options, as well as tools for managing the Switch. This includes: C613-04038-01 REV F ■ The AT-9800 Series Statutory and Safety Information booklet, which provides safety and statutory information for the Switch and its expansion options.
