Specifications

22 AT-9800 Series Switch
C613-03059-00 REV E
AT-RPS8000
The AT-RPS8000 is a chassis that holds up to four removable AT-PWR8000 RPS
units. To provide backup power to AT-9812TF and AT-9816GF switches, each
switch must be connected to an AT-PWR8000 power unit, and the power unit
must be installed in an AT-RPS8000 chassis.
Table 8 on page 22 lists the RPS connector’s pin numbers and pin functions, as
found on AT-9812TF and AT-9816GF switches.
Table 9 on page 22 illustrates the connector’s pin layout, as found on the rear
panel of AT-9812TF and AT-9816GF switches.
Pin 16 is at the connector’s top left, while pin 1 is at its lower right.
Table 8: RPS Connector Pin Numbers and Functions.
Pin Number Function
1 +12VDC
2 Remote Sense (RS) +5VDC
3 Remote Sense (RS) Ground
4 Remote Sense (RS) +3.3VDC
5 Redundant Power Supply (RPS) Present
6 Ground (+3.3VDC Return)
7 Ground (+5VDC Return)
8+5VDC
9 Ground (+12VDC Return)
10 +3.3VDC
11 Ground (+3.3VDC Return)
12 +3.3VDC
13 Ground (+3.3VDC Return)
14 +3.3VDC
15 +5VDC
16 Ground (+5VDC Return)
Table 9: AT-PWR8000 RPS Connector Pin Layout.
16 15 14 13 12 11 10 9
87654321