Specifications

Hardware Reference 9
C613-03059-00 REV E
The key to successful use of terminal emulation software with the switch is to
configure the software and switch with matching communications parameters.
The following procedures describe how to configure Windows Terminal and
HyperTerminal for the default RS-232 ASYN0 settings on the switch, but the
same principles apply to other terminal emulation programs.
To configure Windows HyperTerminal for Windows 95, 98, 2000, & NT 4.0.
1. In Windows, select:
• Programs > Accessories > HyperTerminal.
• Double-click the Hypertrm.exe icon.
2. In the Connection Description dialog box:
• Enter a name for the connection (e.g., AT98001)
• Select an icon from the scrolling list.
•Click “OK”.
3. In the Phone Number dialog box:
From the “Connect using:” drop-down list, select:
•“Direct to Com n” Where “COM n” is the COM port on the PC used to
connect to the switch.
•Click “OK”.
4. In the COMn Properties dialog box, set:
• Bits per second: 9600.
• Data bits: 8.
•Parity: None.
• Stop bits: 1.
• Flow control: Hardware.
•Click “OK”.