User`s guide

AT-S45 User’s Guide
99
The VLAN Port Configuration Menu is displayed. An example is
shown in Figure 26.
Figure 29 VLAN Port Configuration Menu
This window lists the ports on the switch and each port’s current PVID
assignment. For example, referring to the figure above, Ports 1 to 4
and Ports 5 to 8 are untagged members of different VLANs.
4. To set a PVID, type V to select Set Port VID.
The following prompt is displayed:
Set PVID->Enter port number>
5. Enter the port number whose PVID you want to change.
A prompt similar to the following is displayed:
Enter PVID for port 1>
6. Enter the new PVID for the port.
Once a new PVID has been assigned to a port, the port is removed as
an untagged port from its current VLAN and added as an untagged
port to the VLAN whose VID matches the PVID.
AT-9410GB Local Management System
VLAN Management -> VLAN Port Configuration Menu
Port PVID
---- ----
1 1
2 1
3 1
4 1
5 2
6 2
7 2
8 2
-------------------------------- <COMMAND> -----------------------
[N]ext page Set Port [V]ID
[P]revious Page [Q]uit to previous menu
Command> _
Enter the character in square brackets to select option