User`s guide

AT-S45 User’s Guide

The Config VLAN Member Menu for the VLAN is displayed. This

VLAN contains all the current information about the VLAN. An

example is shown in Figure 26.

Figure 28 Config VLAN Member Menu

The columns in the window are defined below:

Port

This column lists the ports that are members of the VLAN.

Participation

This column indicates whether the port is participating in GVRP. For

more information on this selection, refer to Setting GVRP Status on

page 107.

Tagging

This column indicates whether the port is a tagged or untagged port

in the VLAN. No indicates that the port is an untagged member while

Yes indicates that it is a tagged member.

5. To modify the VLAN, use the commands at the bottom of the screen.

The commands are described below:

[C]hange a VLAN Name

This command is used to change a VLAN’s name. To use the

command, type C and enter the new name at the command prompt.

AT-9410GB Local Management System

VLAN MAnagement-> Config VLAN Member Menu

VLAN ID: 3 VLAN Name: Engineering

Port Participation Tagging

---- ------------- -------

8 Static No

9 Static No

10 Static No

11 Static No

16 Static No

23 Static No

------------------------------Command----------------------------

[N]ext Page [C]hange VLAN Name [A]dd VLAN Member

[P]revious Page [M]odify Participation [R]emove VLAN Member

[Q]uit to previous menu

Command> _

Enter the character in square brackets to select option