User`s guide

AT-S45 User’s Guide
95
The following prompt is displayed:
Set PVID->Enter port number>
4. Enter the port number whose PVID you want to change.
A prompt similar to the following is displayed:
Enter PVID for port 1>
5. Enter the new PVID for the port.
Once a new PVID has been assigned to a port, the port is removed as
an untagged port from its current VLAN and added to the new VLAN
as an untagged port.
If the port is also an tagged member of any VLANs, it remains as a
tagged member of those VLANs.
6. Repeat Steps 3 to 5 to assign new PVIDs to any other ports that are to
be untagged members of the new VLAN.
7. Once you have changed all of the appropriate PVIDs, type Q to select
Quit to Previous Menu.
The VLAN Management Menu in Figure 25 on page 91 is displayed
again.
This completes the procedure for creating a new VLAN.