User`s guide

AT-S45 User’s Guide
73
Disabling a Port Monitor
To disable a port monitor, perform the following procedure:
1. From the Main Menu, type A to select Switch Advanced Configuration
Menu.
2. From the Switch Advanced Configuration Menu, type M to select
Port Monitoring Configuration Menu.
The Port Monitoring Configuration menu in Figure 22 on page 71
is displayed.
3. Type E to select Enable/Disable Port Monitoring.
The following prompt is displayed.
Enable or Disable monitoring (E/D)>
4. Enter D to disable port monitoring.
The port monitor on the switch is now disabled. The port that was
functioning as the port monitor is now available for normal
network operations.