User`s guide

AT-S45 User’s Guide
71
Creating a Port Monitor
To create a port monitor, perform the following procedure:
1. From the Main Menu, type A to select Switch Advanced
Configuration.
2. From the Switch Advanced Configuration Menu, type M to select
Port Monitoring Configuration Menu.
The Port Monitoring Configuration Menu in Figure 22 is displayed.
Figure 22 Port Monitoring Configuration Menu
3. Type S to select Set Monitoring Port.
The following prompt is displayed.
Set monitoring port->Enter port number>
Port number is in range of 1 to 12
4. Enter the number of the port to function as the monitor port (that is,
the port to where the traffic will be copied). Press Return.
You can specify only one monitor port.
5. Type M to select Set Monitored Port.
The following prompt is displayed.
Set monitored port->Enter port number>
Port number is in range of 1 to 12
6. Enter the number of the port whose traffic is to be monitored. You can
specify only one port to be monitored.
AT-9410GB Local Management System
Enter the character in square brackets to select option
Advanced Switch Configuration -> Port Monitoring Configuration Menu
Monitoring Port Monitored Port Status
--------------- -------------- -----------
1 4 Enabled
------------------------- <COMMAND> -----------------------------
[S]et Monitoring Port
Set [M]onitored Port
[E]nable/Disable Port Monitoring
[Q]uit to previous menu
Command>