User`s guide

AT-S45 User’s Guide
58
Configuring Port Security
To set a switch’s port security level, perform the following procedure:
1. From the Main Menu, type A to select Advanced Switch
Configuration.
2. From the Advanced Switch Configuration Menu, type P to select Port
Security Configuration.
The Port Security Configuration Menu in Figure 16 is displayed.
Figure 16 Port Security Configuration Menu
3. To select the desired security level, type S to select Set Secure Level.
The following prompt is displayed:
Set secure level->Enter port number >
4. Enter the number of the port you want to configure. Press Return.
The following prompt is displayed:
Limited or Secure port (L/S/N)>
AT-9410GB Local Management System
Enter the character in square brackets to select option
Advanced Switch Configuration -> Port Security Configuration Menu
Port Secure Level Threshold Intrusion Detection Status
---- -------------- ------------ ---------------------------
1 Secure ----- No action
2 Secure ----- No action
3 Secure ----- Notify with trap only
4 Secure ----- No action
5 Secure ----- No action
6 Secure ----- No action
7 Secure ----- No action
8 Secure ----- No action
9 Secure ----- No action
10 Secure ----- No action
11 Secure ----- No action
12 Secure ----- No action
-------------------------- <COMMAND> ----------------------------
[S]et Secure Level Set [T]hreshold
Set Intrusion [D]etection [Q]uit to previous menu
Command>