User`s guide

AT-S45 User’s Guide
52
Link
The link status between the port and the end node connected to
the port. Possible values are:
Up - indicates that a valid link exists between the port and the end
node.
Down - indicates that the port and the end node have not
established a valid link.
Status
The current operating status on the port. Possible values are:
Enabled - Indicates that the port is enabled.
Disabled - Indicates that the port is disabled.
Mode
The operating mode of the port. Possible values are:
❑ Auto-Negotiate: The port will Auto-Negotiate both speed and
duplex mode. This is the default.
❑ 1000Mbps - Half Duplex
❑ 100Mbps - Full Duplex
❑ 10Mbps - Full Duplex
❑ 1000Mbps - Half Duplex
❑ 100Mbps - Half Duplex
❑ 10Mbps - Half Duplex
Flow Control
The flow control setting for the port. Possible values are:
Disabled - No flow control on the port.
Enabled - Flow control is activate on the port.