User`s guide

AT-S45 User’s Guide

For example, if you specify a 2 minute time out, the

management software automatically ends the Telnet

management session if it detects no activity from the remote

management station after 2 minutes.

The range is 0 to 60 minutes. A value of “0” means the switch

will never time out the management session. The default is 5

minutes.

Change Administrator User [N]ame

Sets the login name. The management software will prompt

you for this name whenever you start a local or remote

management session.

Note

Changing the login name requires entering the current password.

You will not be able to change the user name unless you know the

password.

Change Administrator [P]assword

Sets the login password. The management software will

prompt you for this password whenever you start a local or

remote management session.

Note

Changing the login password requires entering the current

password.

Enable/Disable Te[l]net Server

Enable/Disable [S]NMP Server

Enable/Disable [W]eb Server

Controls remote management. You can use these three

commands to disable remote management of the switch

using the Telnet application protocol, an SNMP management

program, or a web browser. For example, if you do not want

the switch to be managed from a web browser, you would use

the Enable/Disable Web Server command to disable this

feature on the switch.