User`s guide

AT-S45 User’s Guide
42
The User Interface Configuration window in Figure 9 is displayed.
Figure 9 User Interface Configuration Menu
3. Adjust the parameters as desired. The commands for changing
the parameters are described below:
Set [C]onsole UI Time Out
Configures the console time out in minutes. The switch will
automatically end a local management session if it does not
detect any management activity after the time period
specified with this command.
For example, if you specify a 2 minute time out, the
management software automatically ends the management
session if it detects no activity from the terminal connected to
the console port after 2 minutes.
The range is 0 to 60 minutes. A value of “0” means the switch
will never time out the management session. The default is 5
minutes.
Set [T]elnet UI Time Out
Configures the Telnet time out in minutes. The switch will
automatically end a Telnet management session if it does not
detect any management activity after the time period
specified with this command.
AT-9410GB Local Management System
Enter the character in square brackets to select option
Basic Switch Configuration Menu -> SNMP Configuration Menu
Basic Switch Configuration -> User Interface Configuration Menu
Console UI Idle Timeout: 5 Min.
Telnet UI Idle Timeout: 5 Min.
Telnet Server: Enabled
SNMP Agent: Enabled
Web Server: Enabled
User Name: manager
---------------------------- <COMMAND> ----------------------------------
Set [C]onsole UI Time Out Enable/Disable Te[l]net Server
Set [T]elnet UI Time Out Enable/Disable [S]NMP Agent
Change Administrator User [N]ame Enable/Disable [W]eb Server
Change Administrator [P]assword [Q]uit to previous menu
Command>