User`s guide

AT-S45 User’s Guide
40
Resetting the Switch
To reset a switch, perform the following procedure:
1. From the Main Menu, type T to select Switch Tools Menu.
Caution
Check the Reboot Type field in the window. It should indicate the
reboot type as “Normal”. If this field is indicating Factory Default or
Factory Default Except IP, change the setting using the Set Reboot
Option command. For further information on the other reboot
types, refer to the previous procedure.
2. From the Switch Tools Configuration Menu, type R to select System
Reboot.
3. From the Switch Tools Menu, type R to select Start Reboot Process.
The following prompt is displayed:
Are you sure to reboot the system (Y/N)>
4. Type Y to reset the switch or N to cancel the procedure.
The switch immediately reloads its operating system, a task
requiring only seconds to complete.
Caution
The switch will not forward traffic during the brief period required to
reload its operating software. Some data traffic may be lost.